ProMaster XC-M 528K Professional Tripod Kit with Head – Black #5085

The XC-M 528K is more than just a compact, go-anywhere tripod—it’s part of an expansive modular system.

The ProMaster XC-M 528 tripod’s 5-section, transverse legs fold 180°, making the entire unit just 16 1/2″ long for storage and travel. Fully extended, it reaches a working height of over 6.5′! Each leg’s angle and length are independently adjustable, allowing the XC-M 528 to properly support your camera on uneven ground. A two-stage center column allows you to maximize working height without sacrificing the tripod’s compact size. The center column is reversible, and the weight hook can help achieve better stability in windy conditions or when making long exposures. Its dual-action ball head is strong, precise, and lightweight, with an independent pan control. It has an integrated memory lock for repeatable tension control and uses ProMaster’s Dovetail quick release system (Arca-compatible) for fast and secure camera connection.

XC-M stands for eXtreme Compact Modular, and it is the modular component that makes this tripod system truly special. Expand and customize the XC-M tripod to meet your specific creative needs:

– While some tripods use a single, detachable leg to form a monopod, all three legs on a ProMaster XC-M tripod are removable and can be attached to the center column to form a full-sized monopod. By connecting a set of ProMaster Extension and Macro Legs (product 3559), you can either extend the tripod’s height or achieve an incredibly stable macro tripod.

– Remove the rubber feet at the bottom of each leg and replace them with a set of All Terrain Feet (product 3510) for a robust system of stainless-steel spikes with soft, removable covers and sand/snow baskets.

– Slide the center column out and add a Ground Level Adapter (product 3531) for low-angle shots, or try the Column Tilt Adapter (product 4028) to convert the center column to a multi-position adjustable boom.

Every ProMaster XC-M tripod has a Mini Dovetail Plate installed in its yoke, which lets you quickly add an accessory such as a flex arm or articulating arm. Pre-attach your accessory to a ProMaster MD Clamp (product code 3573), and it can then be installed or removed from the tripod in a matter of seconds.

XC-M is the most adaptable tripod system available anywhere in the world today.

KIT SPECIFICATIONS

• Maximum Working Height: 80″ / 203.2 cm
• Maximum Height with Column Down: 60 11/16″ / 154.1 cm
• Minimum Working Height: 16 11/16″ / 42.4 cm *Minimum working height can be improved to 6 1/4″ / 15.88 cm by adding a 3531 XC-M 525 Ground Level Adapter (sold separately)
• Folded Length: 16 1/2″ / 42 cm
• Maximum Load: 20 lbs / 9.1 kg
• Weight: 4 lbs 1 3/4 oz / 1.86 kg
• Cold Weather Performance: -4° F / -20° C
• 5-Section Aluminum Legs

* Kit specifications include tripod with head attached

BALL HEAD SPECIFICATIONS

• Height: 3 7/16″ / 8.7 cm
• Base Diameter: 2″ / 5.1 cm
• Weight: 11 oz / 312 grams

Note: Height and weight do not include the Quick Release Plate since it will be attached to the camera.

TRIPOD LEG SPECIFICATIONS

• Maximum Working Height: 76 1/2″ / 194.5 cm
• Maximum Height with Column Down: 57 1/4″ / 145.4 cm
• Minimum Working Height: 13 1/4″ / 33.7 cm
• Leg Angles: 20° / 50° / 80° / 180°
• Platform Diameter: 1 9/16″ / 4 cm
• Folded Length: 16 1/2″ / 42 cm
• Weight: 3 lbs 6 3/4 oz / 1.55 kg

INCLUDES

• XC-M 528 Aluminum Tripod Legs with Twist Locks
• XC-MH36 Ball Head
• 3608 Quick Release Plate
• Tool kit with storage pouch
• Mini Dovetail Accessory Plate (Mini Dovetail clamp, product 3573, sold separately)

For storage, protection, and transport use the following tripod case options:

• ProMaster TC-19 (product 4994) when the tripod is fully folded in it’s transverse leg position
• ProMaster TC-24 (product 5001) when the tripod is collapsed but head and column are in their normal, photography position.